SEH TPG-65 User Manual download pdf (Page 63)

Security

TPG User Manual 63

What do you want

to do?

 ’Configuring EAP-MD5’ Ö63

 ’Configuring EAP-TLS’ Ö63

 ’Configuring EAP-TTLS’ Ö65

 ’Configuring PEAP’ Ö66

 ’Configuring EAP-FAST’ Ö67

Configuring EAP-MD5

Benefits and

Purpose

EAP-MD5 validates the identity of devices or users before they gain

access to network resources. You can configure the TPG for the

EAP-MD5 network authentication. This makes sure that the TPG gets

access to protected networks.

Mode of Operation

EAP-MD5 describes a user-based authentication method via a

RADIUS server. The TPG must be defined as user (with user name and

password) on a RADIUS server. The authentication method EAP-MD5

must then be enabled on the TPG and the user name and password

need to be entered.

Requirements

; The TPG is defined as user (with user name and password) on a

RADIUS server.

Proceed as follows:

1. Start the TPG Control Center.

2. Select SECURITY – Authentication.

3. Select MD5 from the Authentication method list.

4. Enter the user name and the password that are used for the

configuration of the TPG on the RADIUS server.

5. Click Save & Restart to confirm.

ª The settings are saved.

Configuring EAP-TLS

Benefits and

Purpose

EAP-TLS (Transport Layer Security) validates the identity of devices

or users before they gain access to network resources. You can

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 106 107

No comments

SEH TPG-65 User Manual Page 63