SEH TPG-65 User Manual Page 14

  • Download
  • Add to my manuals
  • Print
  • Page
    / 107
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 13
General Information
TPG User Manual 14
ZeroConf
If no IP address can be assigned via boot protocols, the TPG assigns
itself an IP address via ZeroConf. For this purpose, the TPG picks an
IP address at random from the address range (169.254.0.0/16) which
is reserved for ZeroConf.
You can use the domain name service of Bonjour for the name
resolution of the IP address; see: Ö35.
BOOTP
The TPG supports BOOTP, which means that the IP address of the
TPG can be assigned via a BOOTP server.
Requirements
; The 'BOOTP' parameter has been enabled, see: Ö26.
; A BOOTP server is available in the network.
If the TPG is connected, it asks the BOOTP host for the IP address
and the host name. The BOOTP host answers and sends a data packet
containing the IP address. The IP address is saved in the TPG.
DHCP
The TPG supports DHCP, which means that the IP address of the TPG
can be assigned dynamically via a DHCP server.
Requirements
; The 'DHCP' parameter has been enabled, see: Ö26.
; A DHCP server is available in the network.
After the hardware installation, the TPG asks a DHCP server for an IP
address by means of a broadcast query. The DHCP server identifies
the TPG on the basis of its hardware address and sends a data packet
to the TPG.
This data packet contains, among others, the IP address of the TPG,
the default gateway, and the IP address of the DNS server. The data
is saved in the TPG.
Page view 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 106 107

Comments to this Manuals

No comments