SEH TPG-65 User Manual download pdf (Page 42)

ThinPrint Settings

TPG User Manual 42

4.3 How to Embed Printers

Print jobs are sent from the ThinPrint server to the TPG. After the

decompression of the print jobs, the TPG forwards the print jobs to

the printers.

The print jobs are assigned via the printer ID. Up to two (TPG-25) or

six (TPG-65) network printers can be embedded via the TPG.

When integrating the connected network printers you must define

the printer parameters (name, class, driver, address) and a transfer

method.

Transfer

Methods

The data transfer between the TPG and the network printers can be

done in three ways:

• Usually the data is transferred to the TCP/IP port via a

raw/socket connection. Port 9100 is preset. If required, you can

configure a different port number.

• By means of IPP connections (Internet Printing Protocol) the

print data is transmitted via HTTP 1.1 via local networks or the

Internet to the printer. To this purpose, you must configure a

printer URL that needs to be implemented according to the

information of the manufacturer. Please refer to the

documentation of your printer. The printer URL 'ipp/lp1' is preset

and can be changed, if needed.

Your advantage: The connection between the TPG and the

printer can be encrypted via SSL/TLS.

• Data transfer can also be done via the LPD protocol (Line Printer

Daemon). During LPD printing the print data is sent to the IP

address of the printer by means of an LPD queue.

The LPD queue name 'lp1' is preset. If required, you can

configure a different LPD queue name. Depending on the

configuration, the printing behavior is either compliant to

RFC1179 or resembles Microsoft LPD printing.

Your advantage: When using the LPD protocol for data transfer,

additional print job attributes will be transferred and displayed

in the 'job history' (Ö81).

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 106 107

No comments

SEH TPG-65 User Manual Page 42