SEH Print Server Installation Manual download pdf (Page 12)

Information

Print Server Installation Manual 12

Saving the IP Address via the IP Wizard (InterCon-NetTool)

The IP Wizard of the InterCon-NetTool helps you to configure the

TCP/IP parameters, e.g. the IP address. You can easily enter the

desired IP address and save it in the print server using the IP Wizard.

Requirements

; The InterCon-NetTool is installed on the client, see: Print Server

User Manual.

; By means of the InterCon-NetTool you can scan the network via

Multicast, see: Print Server User Manual.

; The router in the network forwards multicast requests.

Proceed as follows:

1. Start the InterCon-NetTool.

2. Select the print server from the print server list.

The print server is displayed in the print server list under 'ZeroConf' with an IP

address from the address range (169.254.0.0/16) which is reserved for ZeroConf.

3. Select Installation – IP Wizard from the menu bar.

The IP Wizard is started.

4. Follow the instructions of the Wizard.

ª The settings are saved.

Abb. 1: InterCon-NetTool - IP Wizard

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 48 49

No comments

SEH Print Server Installation Manual Page 12